Audi/VW B5 1.8T Transmission Mount Installation
Description: Audi/VW B5 1.8T stërn Transmission Mount Installation
Congratulations on the purchase of your new stërn transmission mount. This mount will provide a great reduction in transmission movement making shifting much more secure. With less transmission movement you’ll have less drivetrain slop as well, resulting in more power transmitted to the wheels. Upgraded engine mounts are recommended to be used in conjunction. Below are our installation guidelines for this item. Please review them carefully before attempting to install this product.
Raise the front of the car and secure it with jack stands. Never work under a car supported only by a hydraulic floor jack. Check your owner’s manual for proper placement of floor jacks and jack stands.
Identify the transmission mount. It is located just rear of the driver side wheel adjacent to the transmission. It is shown in the Photo 1 below in the highlighted area circled in red.
Place your floor jack underneath the transmission to carefully support the weight. Lift the transmission such that the mount raises no more than 1/8” from the subframe.
Using an 8mm hex remove the remaining bolt from the side of the mount. You can then carefully remove the mount as shown in Photo 3.
Insert the new mount and partially secure the lower mounting nut to hold it in place. Insert the new mounting bolt through the transmission bracket and through the stërn transmission mount and secure with the new washer and nut. Be sure to properly orient the inner large diameter washer. The keyhole must be positioned straight up at the 12 o’clock position.
Alert! All files source are collected from search engine, we don't save any manuals on our server. We respect the copyright matter. Please report to me if you get broken link on the comment form or contact us if you owned the document that contain copyrighted and want to remove it.